|weight (empty):||140 kg|
|weight (full):||340 kg|
|Alkaline capacity heating power||5 kWt|
|Pump power||2 pumps for 0,55 kWt|
|The volume of tanks for cleaning solutions||100 l.|
|Material||304 stainless steel|
|Power supply||380 V|
The unit is designed for cleaning brewery tanks up to 1000 liters and have additional option - washing beer kegs in semi-manual mode with removing the keg valve (beer spear).
The unit ideally combines the ratio of functionality and cost for craft mini-breweries with working tanks (fermenters, kettles, tanks) with a useful volume of up to 1000 liters and bottling up to 1000 liters of finished beer per day.
In such a volume, washing from 20 to 33 kegs per day in semi-manual mode with removing the keg valve will not be difficult.
Washing of working tanks is carried out in the same way as with ordinary CIP stations.
The keg is washed with removing the keg valve, and installing the keg on the spray balls upside down.
WT – Rinsing kegs with water; AL – Alkaline wash spot; AС – Acid wash spot.
Turn the keg upside down and put it on the one of splay balls, turn on the corresponding pump and open the corresponding tap for the supply of washing liquid. So rinse the keg for a few minutes.
Then move the keg to the next appropriate spray ball and repeat the procedure.
1(WT) – Rinsing kegs with water
2(AL) – Rinsing kegs with alkaline (use only chemical solutions acceptable in brewing!)
3(WT) – Rinsing kegs with water
4(AC) – Rinsing kegs with acid (use only chemical solutions acceptable in brewing!)
After rinsing the keg with acid, an hour later the keg is ready to fill with beer.
To prevent mixing of acid and alkaline solutions, unit is equipped with two independent pumps and separate piping lines.
The alkaline solution tank is equipped with a heating system with automatic temperature control.